Ceiling Cup, Cable Kit and Track: Pendant Wiring Basics
By Nuura | Published: 2026-11-02
Category: How-to Guides
Match the right Nuura ceiling cup, cable kit or track to your pendant and ceiling before you drill. A step-by-step wiring plan with checkpoints for white finishes.
Quick answer
Choose the mounting part before you touch the ceiling: a ceiling cup wire white for heavier pendants such as Apiales 9 or 18, a cable kit with switch when you want local switching on compatible wall and pendant lamps, and a track 1 phase white only when you are hanging Anoli Spot lamps. Confirm your lamp model and ceiling rose first, then follow the ordered steps below.
Why the ceiling part decides the wiring plan
Pendant wiring is not one job. A ceiling cup, a cable kit and a track solve different problems, and mixing them up is the most common reason a white Nuura installation stalls halfway. The ceiling cup wire white is a spare part aimed at heavier lamps that need a ceiling rose, while a cable kit is an optional accessory for a defined list of lamps. A one-phase track is a different system altogether because it carries the lamps along a rail rather than from a single ceiling point.
That means your first decision is not wire colour or switch position. It is whether your lamp is designed to hang from a ceiling cup, to use a cable kit, or to sit on a track. The catalog facts for each part name the compatible lamps, so use those lists as your gate before ordering or drilling.
Where the white finish helps and where it limits you
All three parts are supplied in white, which keeps a pale ceiling visually quiet and is the easier match when you already have white ceiling roses or a white track. The trade-off is that white shows dust and handling marks more than darker finishes, so plan to clean the parts before final assembly rather than after. If your ceiling is not white, check the contrast in daylight before committing, because a white cup or track on a tinted ceiling reads as a deliberate line rather than a hidden detail.
The ceiling cup wire white is specifically listed for heavier lamps such as Apiales 9 and Apiales 18, so do not assume it is a universal upgrade for every pendant. Likewise, the cable kit is listed only for Miira Wall, Apiales Wall, Liila Small, Medium and Large, Liila Muuse and Sasi Wall lamps. If your lamp is not on those lists, treat the absence as a limitation and confirm compatibility before purchase.
Track versus ceiling cup: an exception worth knowing
A track 1 phase white is not a substitute for a ceiling cup. It is a one-phase track intended for the Anoli Spot collection and can hold up to five lamps at once. That makes it the right choice when you want several spots on a single line, and the wrong choice when you are hanging one pendant from a ceiling rose. The practical consequence is that track planning starts with lamp count and rail position, while ceiling cup planning starts with the weight and model of a single lamp.
Step-by-step pendant wiring plan
- Identify your lamp and its mounting type: Check the lamp model against the compatibility lists: ceiling cup wire white for heavier lamps such as Apiales 9 and Apiales 18, cable kit for Miira Wall, Apiales Wall, Liila Small, Medium and Large, Liila Muuse and Sasi Wall, and track 1 phase white for Anoli Spot. Write down the mounting type before ordering anything. If your lamp is not on a list, stop and confirm compatibility rather than guessing.
- Confirm the ceiling point and power: Decide whether the lamp hangs from a single ceiling rose or runs on a track, then confirm that the ceiling position has a suitable power supply and enough clearance for the lamp. For a track, plan the rail line and the position of up to five Anoli Spot lamps before drilling. A track needs a linear plan; a ceiling cup needs one precise point.
- Choose the white part that matches the job: Select the ceiling cup wire white only for the heavier lamps it lists, the cable kit with switch only for compatible lamps, and the track 1 phase white only for Anoli Spot. Keep the parts in their original packaging until you have checked the model numbers against the lamp. White is a finish choice, not a compatibility guarantee.
- Dry-fit the cup, cable or track before wiring: Hold the ceiling cup or track against the ceiling and check that the rose or rail covers the ceiling opening and sits flat. For the cable kit, check that the switch falls where you can reach it. Do not cut or shorten cables until the dry fit is correct. A dry fit catches alignment mistakes before the power is off.
- Isolate the power and make the connections: Switch off the circuit at the breaker, then connect the pendant or track according to the fitting instructions. Keep white parts clean and free of dust during assembly, because marks are harder to remove once the lamp is hanging. Never rely on a wall switch alone when working at the ceiling.
- Test and clean before final tightening: Restore power and test the lamp or track, including the cable kit switch if fitted. Once everything works, clean the white surfaces and tighten the ceiling cup or track fixings fully. Test first, clean second, tighten last.
Product facts
- Ceiling Cup Wire, white: Ceiling Cup Wire in white is a spare part intended for mounting heavier lamps, such as Apiales 9 and Apiales 18, in a ceiling rose. Use it when your pendant is one of those heavier models and you need a ceiling-rose connection rather than a generic cup.
Ceiling Cup Wire, white - Cable Kit, white with on/off switch: Cable Kit is an optional accessory for Miira Wall, Apiales Wall, Liila Small, Medium and Large, Liila Muuse and Sasi Wall lamps. It adds a switched cable option only for those listed lamps, so check your model before planning a switch on the cable.
Cable Kit, white with on/off switch - Track 1 Phase, 1M, PRO, white: Track 1 Phase, 1M, PRO, white is a one-phase track designed for the Anoli Spot collection and can hold up to five lamps at once. Plan track layout around up to five Anoli Spot lamps rather than treating it as a pendant ceiling cup.
