How to Install Florii 5 Linear PRO: Ceiling Mount Guide

Quick Answer

Mount the Florii 5 Linear PRO by first securing the ceiling canopy to a junction box, then connecting the integrated LED driver wiring, and finally attaching the linear pendant bar with its five shades.

Installation Steps

1. 1. Prepare the Ceiling Junction Box: Turn off power at the breaker. Remove the existing light fixture and ceiling plate. Confirm the junction box is securely fastened to a ceiling joist and rated for at least 10 kg. If the box is plastic or poorly anchored, replace it with a metal box rated for heavy fixtures. Common mistake: using a lightweight box that cannot support the canopy's weight.
2. 2. Mount the Canopy and Connect Wiring: Thread the supply wires through the canopy's center hole. Attach the canopy bracket to the junction box using the provided screws. Connect the house ground wire to the canopy ground screw, then join the live and neutral wires from the driver to the corresponding house wires using wire nuts. Tuck the wires neatly into the box. Checkpoint: ensure the driver wires are not pinched between the canopy and the ceiling.
3. 3. Attach the Linear Pendant Bar: Slide the pendant bar's mounting bracket over the canopy's threaded stud and secure it with the lock nut. Lift the bar into place and tighten the set screws on each end to lock the bar level. The five white polycarbonate shades should hang evenly; adjust the bar's position if needed. Common mistake: over-tightening the set screws, which can crack the bar's mounting holes.
4. 4. Install the Five Shades and Test: Snap each shade onto its socket by aligning the tabs and twisting clockwise. Restore power and test the light. If any shade flickers, turn off power and check the socket connection. The dark bronze finish on the bar provides contrast; wipe it with a dry cloth to remove fingerprints. Final check: the shades should rotate freely without wobbling.

Product Facts

• Florii 5 Linear, PRO, dark bronze / white: The Florii 5 Linear features integrated LED technology that can be replaced without tools. This means you won't need to rewire the fixture when the LEDs eventually dim—just swap the LED module directly from the canopy.