A damaged shade is a parts question, not a lamp question
When the glass on a Rizzatto 32 gets cracked, chipped or otherwise compromised, you usually do not need to replace the whole fixture. Nuura lists a dedicated spare-part glass for this model: the Rizzatto Glass Ø30, PRO, in a brass and opal finish. The practical decision is whether this specific part matches your existing fixture and finish.
The supplied catalog information is narrow but clear. It identifies the part as spare-part glass for the Rizzatto 32 in a brass/opal finish, associated with the PRO / Professional range. It also carries an explicit instruction: confirm compatibility with your existing Rizzatto 32 fixture before ordering. That confirmation step is the core of this guide.
What the catalog confirms about this spare glass
- Rizzatto Glass Ø30, PRO, brass / opal: Rizzatto Glass Ø30, PRO, brass / opal is listed as spare-part glass for the Rizzatto 32. This is the primary fit statement. It ties the part to one fixture model, so your first check is whether your lamp is a Rizzatto 32.

Rizzatto Glass Ø30, PRO, brass / opal - Rizzatto Glass Ø30, PRO, brass / opal: The finish is brass / opal, and the part is associated with the PRO / Professional range. Finish and range help you match the replacement to what is already on your fixture, rather than mixing a brass/opal PRO part with a different finish or range.
- Rizzatto Glass Ø30, PRO, brass / opal: The catalog states: Please confirm compatibility with your existing Rizzatto 32 fixture before ordering. This is the manufacturer's own caution in the supplied record. Treat it as a required check, not a formality.
How to confirm the Ø30 PRO brass/opal shade is your part
The supplied record does not include a serial-number lookup, measurement tolerance or installation procedure. These checks use only what the catalog confirms, so they narrow the decision without pretending to settle every case.
- Identify the fixture as a Rizzatto 32: The spare glass is listed for the Rizzatto 32. If your lamp is a different Rizzatto model, this part is not confirmed for it.
- Match the finish and range: The part is brass / opal and belongs to the PRO / Professional range. Compare that with the finish and range of the fixture you are repairing.
- Note the Ø30 designation: The product name includes Ø30. The supplied information does not give a measurement tolerance or a measuring method, so use the name as an identifier rather than a substitute for confirming the model.
- Ask before ordering if anything is unclear: The catalog's own instruction is to confirm compatibility with your existing Rizzatto 32 fixture. If your fixture's model or finish is uncertain, resolve that before purchase.
What a crack does and does not tell you
A visible crack or chip is a reason to stop using the shade and address the part, but the supplied information does not identify causes of glass damage, nor does it provide a repair or inspection procedure. This article will not guess at either. What the record does support is the replacement route: a listed spare-part glass for the Rizzatto 32.
The record also does not describe how the glass is fitted or removed. If you need installation guidance, that is a separate question from compatibility, and the supplied evidence does not answer it. Do not treat this guide as fitting instructions.
Caring for an opal diffuser without inventing rules
The opal finish on this shade is part of its identity, and the catalog lists the finish but does not supply cleaning agents, methods or intervals. Rather than invent a care routine, keep the distinction clear: the supplied record confirms the brass/opal finish and the spare-part role, and it does not confirm specific care procedures. If you want guidance on opal glass care generally, use a source that addresses it directly rather than assuming this part's requirements from its name.
This part vs other Rizzatto glass options
Nuura's range includes other Rizzatto glass spares, so the risk is choosing by diameter or finish alone. The supplied evidence for this article covers only the Ø30 PRO brass/opal part.
- Rizzatto Glass Ø30, PRO, brass / opal: Listed as spare-part glass for the Rizzatto 32, brass/opal finish, PRO / Professional range. This is the part covered by the supplied record.
- Other Rizzatto glass spares: The supplied evidence does not describe their compatibility. Do not assume a different diameter or finish is interchangeable with this one; confirm against the fixture model instead.
Where the supplied information stops
The record does not state a measurement tolerance for Ø30, a fitting method, a care routine, or a cause for glass cracks. It also does not confirm compatibility with any fixture other than the Rizzatto 32. Those gaps are decision limits, not negative findings about the product. The reliable path is to confirm your fixture is a Rizzatto 32 in the brass/opal PRO context, then order the listed spare.


