Charge Portable Nuura Lamps with Multicharger Cradle
By Nuura | Published: 2026-10-18
Category: How-to Guides
Learn how to charge portable Nuura lamps using the multicharger cradle for Blossi Table Mini, including setup, charging steps, and common mistakes to avoid.
Quick answer
Place each Blossi Table Mini onto the multicharger cradle so the contacts align, then plug in the included power supply. The cradle charges up to 8 lamps at once without individual cables.
Why use the multicharger cradle?
The multicharger cradle for 8 pieces is designed specifically for the Blossi Table Mini. It replaces the need for separate USB-C cables by providing a single docking station that charges all lamps simultaneously. This is especially useful if you have multiple portable lamps in a cafe, office, or bedroom setup.
One trade-off: the cradle is a dedicated accessory, so it only works with Blossi Table Mini lamps that have the black metal base. If you have other portable Nuura models, you will need a different charging method.
Steps to charge your portable Nuura lamp
- 1. Place the lamp on the cradle: Align the bottom of your Blossi Table Mini with the charging slot on the multicharger cradle. The metal contacts on the lamp base must touch the cradle's pins. You will hear a faint click when it is seated correctly. Do not force the lamp onto the cradle. If it does not sit flush, check that the base is the black metal version and that no debris blocks the contacts.
- 2. Connect the power supply: Plug the included power supply into the cradle's input port, then connect it to a wall outlet. A small LED on the cradle will light up to indicate power is flowing. Use only the supplied power supply. Third-party adapters may not provide the correct voltage and can damage the battery or cradle.
- 3. Confirm charging status: Look at the lamp's base for a small charging indicator. A steady red or orange light means the lamp is charging; a green light means it is fully charged. Charging time varies but typically takes 3–4 hours for a full cycle. If the indicator does not light up, reseat the lamp and check the cradle's LED. A dark cradle LED means no power — verify the wall outlet is working.
- 4. Remove and use the lamp: Once fully charged, lift the lamp straight off the cradle. The lamp will run cordlessly until the battery is depleted. You can leave the lamp on the cradle after charging — the system stops charging automatically to protect the battery. Avoid leaving the lamp on the cradle for days after full charge. Although overcharge protection is built in, periodic full discharge cycles help maintain battery health.
Product facts
- Multicharger cradle for 8 pcs, incl. power supply: The multicharger cradle is supplied as a set of 8 pieces and includes a power supply. You can charge up to eight Blossi Table Mini lamps from one outlet, cutting down on cable clutter and individual charging time.
Multicharger cradle for 8 pcs, incl. power supply - Blossi Portable Acrylic Shade Ø14, opal: The Blossi Portable Acrylic Shade Ø14 in opal is a spare part for the Blossi Table Mini with a black metal base. If your shade gets damaged, replacing it with this opal white shade restores the lamp's original look and light diffusion.
Blossi Portable Acrylic Shade Ø14, opal
