How to Install a Track 1 Phase Ceiling Cup

Quick answer

Installing a Nuura Track 1 Phase ceiling cup involves mounting the track rail, securing the ceiling cup wire, and connecting the pendant fixture. Use the Ceiling Cup Wire PRO for heavier lamps like Apiales 9 or 18.

Installation steps

1. 1. Prepare the mounting surface: Turn off power at the circuit breaker. Mark the position of the track on the ceiling, ensuring it aligns with the junction box. Use a stud finder to locate ceiling joists for secure anchoring. Common mistake: skipping the stud finder can result in the track pulling away from drywall under the weight of multiple lamps.
2. 2. Mount the Track 1 Phase rail: Attach the track rail to the ceiling using the provided brackets and screws. For a 1-meter track, use at least two brackets evenly spaced. Ensure the track is level before tightening. Checkpoint: verify the track is level with a spirit level—an uneven track will cause lamps to hang crooked.
3. 3. Install the ceiling cup wire (if needed): For heavier pendants (e.g., Apiales 9 or 18), screw the Ceiling Cup Wire PRO into the ceiling rose first. This component adds structural support between the ceiling and the pendant canopy. Common mistake: using a standard canopy for a heavy lamp without the ceiling cup wire can lead to sagging or damage over time.
4. 4. Connect the pendant wiring: Thread the pendant wires through the ceiling cup wire and canopy. Connect the live, neutral, and ground wires to the corresponding terminals in the junction box using wire nuts. Follow local electrical codes. Checkpoint: double-check wire connections—loose connections can cause flickering or overheating.
5. 5. Attach the canopy and test: Slide the canopy up to the ceiling cup wire and secure it with the locking ring. Restore power and test the lamp. If using a dimmer, ensure the bulb is dimmable. Common mistake: overtightening the locking ring can crack the canopy; tighten until snug, then stop.

Product facts

• Track 1 Phase, 1M, PRO, black: 1-meter single-phase track in black powder-coated metal, designed for the Anoli Spot collection, holds up to five lamps. This track is ideal for creating a linear lighting layout with multiple spots, but ensure your circuit can handle the total load of up to five fixtures.

  

• Ceiling Cup Wire, PRO, brass: Brass ceiling cup wire intended for mounting heavier lamps such as Apiales 9 and Apiales 18 in a ceiling rose. Use this component when your pendant lamp exceeds the weight capacity of a standard canopy—it provides the necessary reinforcement.