What the Pendant Adapter 1 Phase Does
The Pendant Adapter 1 Phase, 2,5 KG, white is a spare part from Lampeguru, offered by Nuura. It is designed as a pendant adapter for a 1-phase track system, allowing you to hang a pendant light from a compatible ceiling track. The adapter is rated to support fixtures up to 2,5 KG and comes in a white finish.
This guide covers compatibility, weight considerations, and the general installation process so you can safely add pendant lighting to your 1-phase track.
Pendant Adapter 1 Phase: Key Specifications
- Pendant Adapter 1 Phase, 2,5 KG, white: The Pendant Adapter 1 Phase, 2,5 KG, white is a spare part from Lampeguru, offered by Nuura. Identifies the brand and source, ensuring you purchase the correct component for your track system.
Pendant Adapter 1 Phase, 2,5 KG, white - Pendant Adapter 1 Phase, 2,5 KG, white: It is designed as a pendant adapter for a 1-phase setup and is specified with a 2,5 KG weight rating. Confirms compatibility with 1-phase tracks and sets the maximum fixture weight for safe installation.
- Pendant Adapter 1 Phase, 2,5 KG, white: This listing is categorized under private and spare parts. Indicates that the adapter is sold as a replacement or add-on component, not as a complete lighting fixture.
- Pendant Adapter 1 Phase, 2,5 KG, white: Color: white Helps match the adapter to your ceiling or track finish for a cohesive look.
Installation Steps
The following steps outline a general pendant adapter installation. Always follow the specific instructions provided with your track system and consult a qualified electrician if you are unsure about any step.
- 1. Verify Track Compatibility: Ensure your ceiling track is a 1-phase system. The adapter is specifically designed for 1-phase setups and may not fit 3-phase or other track types.
- 2. Check Fixture Weight: Confirm that your pendant light does not exceed 2,5 KG. Exceeding this limit could damage the adapter or create a safety hazard.
- 3. Prepare the Adapter: Unpack the white adapter and inspect it for any damage. If you are replacing an existing adapter, remove the old one from the track.
- 4. Insert into Track: Align the adapter with the track channel and insert it firmly until it clicks or locks into place. The exact locking mechanism may vary by track brand.
- 5. Attach the Pendant Light: Connect your pendant fixture to the adapter's connector or canopy. Ensure the connection is secure and that the weight is evenly distributed.
- 6. Test the Installation: Gently tug on the fixture to confirm it is locked in place. Turn on the power and test the light. If the fixture feels loose or unstable, remove it and recheck the connection.
Compatibility Notes
The supplied information confirms the adapter is for 1-phase tracks, but does not specify which track brands or models are compatible. If you are retrofitting an existing track, check whether your track's shape and electrical contacts match a standard 1-phase adapter. For new installations, choose a track system that explicitly supports this adapter type.
The adapter is listed as a spare part, so it may not include mounting hardware or instructions for a specific fixture. Ensure you have the necessary screws, cables, and tools before starting.
What the Supplied Information Does Not Cover
The available records do not include detailed electrical ratings (e.g., voltage, amperage) or safety certifications. If you need these specifications for a commercial or code-compliant installation, consult the manufacturer or a licensed electrician.
No preparation or operating instructions were provided, so the steps above are based on general pendant adapter installation practices. Always defer to the instructions that come with your specific track and adapter.
