Why Replace Your Florii Shade?
The Florii Shade Large is a lighting shade from Nuura, available as a spare part. You might need to replace it if the original shade is damaged, you want a different look, or you're updating your pendant light. This guide walks you through the swap, using the shade as a standalone component.
Step 1: Prepare for the Swap
Before you begin, ensure you have the correct replacement: the Florii Shade Large (SKU 9120007). This shade is sold as a component within Nuura's spare parts range. Confirm your existing pendant light is compatible—while the shade is designed for Nuura fixtures, check that the mounting ring or socket matches. Turn off the power to the light at the circuit breaker to avoid electrical shock.
- Check compatibility: The Florii Shade Large is a spare part from Nuura, attributed to Belid Lighting Group - Kina. It fits Nuura pendant lights that accept a large shade. Verify your fixture's shade holder size and attachment method.
- Gather tools: You may need a ladder, a soft cloth or gloves to handle the glass, and possibly a screwdriver if the shade is secured with screws. No special tools are required for a standard swap.
Step 2: Remove the Old Shade
Carefully remove the existing shade. Depending on your fixture, the shade may be held in place by a threaded ring, screws, or a twist-lock mechanism. Support the shade with one hand while loosening the fastener with the other. Gently lower the shade and set it aside on a soft surface.
- Handle with care: Glass shades can be fragile. Wear gloves to avoid fingerprints or oils that may etch the surface. If the old shade is broken, wear safety glasses and carefully remove fragments.
Step 3: Install the New Florii Shade Large
Position the new Florii Shade Large over the socket or mounting ring. Align any notches or screw holes. Secure the shade using the same fastener you removed. Tighten gently—overtightening can crack the glass. Wipe the shade with a dry, lint-free cloth to remove any dust or smudges.
- Secure properly: Ensure the shade is level and snug. If the fastener is a threaded ring, turn it clockwise until it stops. Do not force it.
Step 4: Test and Care
Restore power at the circuit breaker and test the light. Check that the shade is securely attached and doesn't wobble. For ongoing care, clean the Florii Shade Large with a soft, damp cloth and mild soap if needed. Avoid abrasive cleaners that could scratch the glass. The shade's finish is not specified, so treat it as a delicate glass component.
Product Facts for Your Swap
- Florii Shade Large: The Florii Shade Large is a lighting shade from Nuura, offered here as a spare part. It belongs to the Parts & Spare parts category and carries the brand attribution Belid Lighting Group - Kina. Available SKU: Standard (code 9120007). This confirms the shade is a genuine replacement component, not a complete fixture. Knowing the SKU helps you order the exact part for your Nuura pendant.
Florii Shade Large
