How to Replace the Asteea Acrylic Shade: Step-by-Step
By Nuura | Published: 2026-10-26
Category: How-to Guides
Learn how to swap a damaged Asteea acrylic shade for a genuine Nuura spare part. Follow these simple steps for a safe, secure replacement.
Quick Answer
To replace the Asteea acrylic shade, turn off the power, remove the old shade, and install the new ripple clear shade gently. Always use a genuine Nuura spare part to ensure a perfect fit and finish.
Why Choose a Genuine Nuura Spare Part?
Using a genuine Nuura spare part ensures the shade matches the original design in size, material, and finish. The Asteea Acrylic Shade Ø12.5 in ripple clear is made from acrylic with a textured, light-diffusing appearance, so it maintains the intended lighting effect.
A non-genuine shade may not fit securely or could alter the light quality. Since the shade is a visible part of the fixture, choosing the correct replacement keeps the design cohesive.
Safety First: Power Off and Cool Down
Before handling any part of your light fixture, always turn off the power at the circuit breaker to avoid electrical shock. Also, allow the fixture to cool down completely if it has been in use.
This is especially important when working with acrylic, which can be sensitive to heat and may become brittle if handled while warm.
Step-by-Step Replacement Guide
- Turn Off the Power: Switch off the circuit breaker that supplies the light fixture. This is a critical safety step. Never skip this step, even for a quick swap.
- Remove the Old Shade: Carefully detach the existing shade from the fixture. Depending on the model, it may twist off or unclip. If it resists, check for a locking mechanism or screws. If the shade is stuck, do not force it—inspect for hidden fasteners.
- Handle the New Shade with Care: Unpack the new Asteea Acrylic Shade and hold it by the edges. Acrylic can scratch easily, so avoid touching the surfaces with abrasive materials. Wear clean gloves to prevent fingerprints.
- Install the New Shade: Align the shade with the fixture and secure it according to the original mounting method. Ensure it sits evenly and is firmly attached. Check that the shade is level and not crooked.
- Restore Power and Test: Turn the circuit breaker back on and switch on the light to confirm the shade is properly installed and the light shines evenly. If the light flickers or the shade seems loose, turn off the power and recheck the installation.
Product Facts
- Sparepart, Asteea Acrylic Shade Ø12.5, ripple clear: The Asteea Acrylic Shade Ø12.5 has a clear ripple finish and is made of acrylic. This spare part matches the original design, ensuring the same light diffusion and visual texture.
Sparepart, Asteea Acrylic Shade Ø12.5, ripple clear
