Replacing Rizzatto Glass Shades: Step-by-Step Guide
By Nuura | Published: 2026-10-23
Category: How-to Guides
Learn how to safely replace a Rizzatto glass shade on your Nuura chandelier. Follow these steps for a secure, damage-free install using genuine spare parts.
Quick answer
Replacing a Rizzatto glass shade is straightforward: remove the old shade carefully, install the new genuine Nuura spare part, and secure it without overtightening. Always match the shade size (e.g., Ø40) to your fixture.
Why use a genuine Nuura spare part?
Nuura lists the Rizzatto Glass Ø40, silver / opal as a spare part because it is precision-made for the Rizzatto fixture. A non-genuine shade may not fit the brass ring or match the opal finish, leading to visible gaps or color mismatch. Using a genuine part also preserves the chandelier's original design and safety rating.
Safety first: power and handling
Always turn off the circuit breaker before touching any chandelier parts. Glass shades can be fragile; work over a soft surface to cushion any accidental drops. Wear gloves to avoid leaving fingerprints on the opal glass.
Step-by-step replacement guide
- 1. Turn off power and prepare the work area: Switch off the circuit breaker for the chandelier. Lay a soft cloth or towel on the floor beneath the fixture to catch any falling parts. Have a clean, dry cloth and a small screwdriver ready. Common mistake: forgetting to turn off power. Always confirm with a non-contact voltage tester.
- 2. Remove the old glass shade: Gently unscrew the finial or retaining nut that holds the shade in place. Lower the shade slowly and set it aside. Inspect the brass ring for any debris or corrosion. Checkpoint: if the retaining nut is stuck, apply gentle pressure—don't force it, or you may damage the brass thread.
- 3. Install the new Rizzatto glass shade: Align the new shade (e.g., Rizzatto Glass Ø40, silver / opal) with the brass ring. Slide it up until it sits flush. Reattach the retaining nut or finial and tighten by hand until snug—do not overtighten. Common mistake: overtightening can crack the glass or strip the thread. Stop as soon as the shade is secure and doesn't wobble.
- 4. Test and clean: Restore power and turn on the chandelier. Check that the shade is level and evenly lit. Wipe the glass with a dry microfiber cloth to remove any fingerprints or dust. Checkpoint: if the shade appears crooked, loosen the nut slightly, adjust the position, and retighten.
Product facts
- Rizzatto Glass Ø40, silver / opal: Rizzatto Glass Ø40, silver / opal is a genuine spare part from Olympia Lighting Co, Ltd., with SKU 9091038. Using this exact part ensures a perfect fit and consistent opal color, avoiding the common problem of mismatched shades on a multi-light chandelier.
Rizzatto Glass Ø40, silver / opal
